Mobiliario de taller

Modular workshop furniture: from a single module to a complete wall

Workshop furniture is planned in linear metres: workbench in the centre, cabinets at the sides, tool wall above and, if the floor plan allows, a corner put to use with a dedicated module. Fami's Garage line is built for exactly this: modules in standard widths (714, 1020, 1216, 1428, 1520, 1824 and 2040 mm), 2000 mm high, up to 640 mm deep, all in light grey and anthracite grey (RAL 7035 + 7016), so they sit side by side with no visible joints and can be extended over the years.

Complete configurations

The complete configurations are ready-designed walls, from 1428 to almost 9000 mm wide: sliding-door cabinets, fixed and mobile drawer cabinets, workbench with multiplex worktop, tool wall with flap-door wall cabinets, Electric perforated panels with power strips and, in the larger versions, a waste compartment and paper roll holder. They come under a single order code. Prices start from around €2,100 for the most compact configuration.

Modules with tool wall

The modules with tool wall are the building blocks of the line: workbench module with one or two drawer cabinets, cabinet module with single door, hinged or sliding doors, including louvred and polycarbonate versions, each already complete with an upper tool wall. They combine freely to build the wall your workshop needs, from around €1,000 per module.

Corner modules

The corner modules close the corner between two walls with a continuous worktop or a 714x754 or 754x754 mm corner element: the space that usually stays empty becomes a work surface and storage compartment.

Matching cabinets, trolleys and accessories

The Garage cabinets and trolleys are the same units used in the configurations, available individually: workshop cabinets with hinged or sliding doors, with shelves or drawers, from 512 to 2040 mm, and matching trolleys. In Garage components and accessories you will find LED bars with power supply and sensor, rubber-coated steel covers for multiplex worktops, adjustable shelves, slotted shelf kits and adjustable feet for uneven floors.

Measure before you order

Measure the width of the wall excluding doors, windows, electrical panels and columns, and the usable height below any cable trunking: the modules are 2000 mm high. Check where the power sockets are, because Electric panels and LED bars need a power supply. With these measurements you can choose the closest complete configuration or combine single modules until the wall is covered.

If you prefer to build the workstation piece by piece, the same series are in the workbenches, metal cabinets and tool panelscategories. For a complete workshop, request a quote with the wall measurements and we will prepare the configuration for you.